Oliver steel-cap work boots: a range overview
This page may later include affiliate links. If you buy through one, the site may earn a commission, at no extra cost to you. Your site's PPE rules still decide what you can wear. This is not medical advice, and a listed standard is not a sign-off for your job.
Series and product claims below were checked on 19 Nov 2026 from the official Oliver pages linked at the end. I did not find list prices on the Oliver product pages I opened.
I have 20 years as a boilermaker and 4 years on pipeline, in steel-cap boots. The brands I stick to are Blundstone, Oliver and Mongrel. When I buy a pair, I pick Oliver. In my view they have the best quality, they feel comfortable, and they last me the longest. That is my opinion from wearing them, not a lab ranking of the ranges below. Right now I wear Oliver AT, or All Terrain, boots. I cannot recall the types of the earlier pairs. The product codes below are official examples from those ranges, not a claim that I wear that exact code.
My sites just require steel-cap safety boots. Oliver also makes composite-cap boots. Those are listed at the end so they are not mixed up with the steel-cap series. Your employer's PPE list still wins.
What Oliver says a steel cap is
On the AT 55 pages I opened, Oliver describes a NATURE form Type 1 steel toe cap, with a wide profile, tested to 200 joules in accordance with AS 2210.3:2019. The same pages also list ASTM F2413-18 and EN ISO 20345:2011. Oliver's features page says a Type 1 steel toe cap is developed to withstand a force of 200 joules, and offers protection against drop and crush injuries.
A "wide profile" cap is about the shape of the cap, not a stated wide-fit last. The AT 55 product pages I opened do not list a last width, an EEE mark, or a size range.
Oliver's FAQ says it offers steel and composite caps, that both pass Australian, European and American safety-standards testing, and that they are "very similar in strength". It also says steel caps "provide more resistance to cutting, but will stay out of shape more than composite caps after heavy impact". That is Oliver's wording, not a test I ran.
Steel-cap series I could verify
Oliver has more than one work-boot series. I checked official range pages, then opened at least one product page in each series below to confirm the cap type. Do not assume every boot on the Oliver site is a steel cap.
| Series | Cap, on the pages I opened | What the official pages emphasise | Example codes |
|---|---|---|---|
| AT 55 | Steel Type 1, 200 joules, on the 55320, 55345Z and 55380 pages | All-terrain leather boots in elastic-side, zip-side and lace-up, including 130mm, 150mm and 200mm heights. Water-resistant full grain leather, described as DIN 3. Dual density PU and rubber sole, SRC slip classification, anti-static, resistant to 300°C surface contact. The AT 55 range page calls the taller profile, available up to 200mm, "the go-to for welders, metal fabricators, and anyone working with heat, sparks, or debris that can enter lower boots". | 55320 elastic-side, 55345Z 150mm zip, 55380 200mm hi-leg zip |
| AT 65 | Type 1 steel toe cap, on the 65490 page | The range page describes 100% waterproof technology, a CORDURA vamp for abrasion and caustic resistance, and a non-metallic penetration-protection insole. The 65490 page also lists a sole heat-resistant to 300°C. Oliver points this series at wet, corrosive and rough outdoor work, not as a workshop slip-on. | 65490 150mm lace-up |
| PB 38 | NATURE form steel toe cap, on the 38250 page | Oliver calls this an executive series, from the worksite to the boardroom, with premium soft-touch leather and a hard-wearing PU outsole. The 38250 page lists the sole as heat resistant to 130°C, not 300°C. That is a different sole claim to the AT 55 pages. | 38250 black elastic-sided |
| HS 66, smelter model | NATURE form Type 1 steel toe cap, on the 66398 page | The 66398 smelter boot is described as having a heat-resistant, flame-retardant leather upper "designed to assist the run-off of molten metal", an internal metatarsal guard, Electrical Hazard protection to ASTM F2413-18, and a dual-density nitrile rubber sole heat resistant to 300°C, with an SRC slip rating. That is a specialist boot. The HS 66 range page also lists firefighter models. I did not open those product pages, so I do not treat the whole series as the same cap or the same job. | 66398 black smelter boot |
Composite series, so they are not mixed in
The official AT 45 range page describes that series as an "All Terrain Composite Toe Boot", with a composite toe cap "40% lighter than steel" and a dual-density PU/TPU sole.
The official AT 54 54545Z page describes "an all terrain water resistant nubuck leather composite toe cap safety boot", and lists a NATURE form composite toe cap. That page also lists a dual density PU and rubber sole resistant to 300°C surface contact. A 300°C sole does not make the cap steel. If your site, like mine, wants a steel cap, these are the wrong shortlist.
How I would use this
If you want a common leather steel-cap work boot from this brand, the AT 55 series is the one the official pages describe for everyday all-terrain work, including zip, lace and elastic-side options. The 200mm hi-leg is the official taller option in that series. The AT 65, PB 38 and the HS 66 smelter boot are different tools, with different official claims about water, heat and molten metal.
Oliver's FAQ says it does sell wide-fitting boots, and that its EEE fitting is "the widest profile available in Australia". I still could not find an EEE mark on the AT 55 product pages I opened. Try the boot on. More on that is in the sizing and wide-fit guide.
For wet civil work, see the wet-site comparison and the trench and civil page. For heat, sparks and boilermaker work, see steel-cap boots for boilermakers and hot work.
Oliver leather safety shoes and boots are warranted for six months against defective workmanship or materials, not against ordinary wear. Oliver also publishes a 30 Day Comfort Guarantee, which it says needs a dated receipt and the comfort-guarantee tag, through the specialist dealer you bought them from.
Buying later
Affiliate programs are not signed up. These are placeholders only. Oliver is listed first because it is my own pick, as an opinion.
Oliver AT 55 55345Z: {{AFF:workwearhub:oliver-55345z}} {{AFF:amazon:oliver-55345z}}
Oliver AT 55 55320: {{AFF:workwearhub:oliver-55320}} {{AFF:amazon:oliver-55320}}
Oliver AT 55 55380: {{AFF:workwearhub:oliver-55380}} {{AFF:amazon:oliver-55380}}
Sources, as checked 19 Nov 2026
- Oliver AT 55 series, oliver.com.au/ranges/at-55-series
- Oliver AT 55 55345Z, oliver.com.au/55-series-150mm-black-zip-sided-boot-55345z
- Oliver AT 55 55320, oliver.com.au/55-series-black-elastic-sided-boot-55320
- Oliver AT 55 55380, oliver.com.au/55-series-200mm-hi-leg-black-zip-sided-boot-55-380
- Oliver AT 65 series, oliver.com.au/ranges/at-65-series
- Oliver AT 65 65490, oliver.com.au/65-series-150mm-brown-lace-up-boot-65490
- Oliver PB 38 38250, oliver.com.au/38-series-black-elastic-sided-executive-boot-38250
- Oliver HS 66 series, oliver.com.au/ranges/hs-66-series
- Oliver HS 66 66398 smelter boot, oliver.com.au/66-series-black-smelter-boot-66-398
- Oliver AT 45 series, composite, oliver.com.au/ranges/at-45-series
- Oliver AT 54 54545Z, composite, oliver.com.au/150mm-black-zip-sided-boot-54-545z
- Oliver FAQ, including cap comparison, wide fit, warranty and comfort guarantee, oliver.com.au/faq
- Oliver footwear features, including the Type 1 steel cap wording, oliver.com.au/footwear-features